User's Manual

42
Fields
Description
Regulatory Domain Select the country from pull down menu.
Remote AP SSID
Select Site Survey option then it will Scan & displays the SSID List, Choose one SSID
from the list.
Enable Wireless
Disable SSID Broadcasting
Enable Isolated
Enable Wireless Option
SSID will be hidden, only users who know the SSID can associate with this network.
User cannot Ping.
Lock to AP Mac Enter MAC address of the access point to which the client will be locked and
connected.
Radio Mode Select the Mode of 2G 11NG HT20 or 2G 11NG HT40
“Auto” option selects the mode by itself.
Channel Select the wireless communication frequency/channel from pull-down menu.
Data Rate
Defines the data rate (in Mbps) at which the device should transmit wireless
packets. You can fix a specific data rate between MCS 0 and MCS 7 (or MCS 15 for
2x2 chain devices).
Transmit Power Defines the maximum average transmit output power (in dBm) of the device. The
transmit power level maximum is limited according to country regulations.
Transmit Distance Changing the distance value will change the ACK (Acknowledgement) timeout value
accordingly, so it means the distance should be set as real distance between LP-
2396K and other device for accurate transmission performance.
Save and Restart It saves the new settings and restarts.