User's Manual

56
Access Control
This page allows administrator to have Access Control by entering MAC address of client
stations. When this function is Enabled, MAC address can be added into access control list and
only those clients whose wireless MAC address are in the access control list will be able to
connect or disconnect the internet.
Fields Description
Wireless Access Control Mode The Selections are:
Disable: Disable the wireless ACL feature.
Allow Listed: When this option is selected, no wireless clients except those
whose MAC addresses are in the current access control list will be able to
connect to internet.
Deny Listed: When this option is selected, all wireless clients except those
whose MAC addresses are in the current access control list will not be able to
connect to internet.
Mac Address Enter client MAC address and press “Apply Changes” button to add client MAC
address into current access control list.
Comment Make a comment for Wireless access control
Function buttons for the Access Control List:
Apply Changes
Click to add this entry into the Access Control List.
The Access Control List lists the client MAC addresses. Any wireless client with its MAC address
listed in this access control list will be able to connect to the device. You can select the entries
at the Select column and apply to the following function buttons.
Delete Selected: Delete the selected entries from the list.
Delete All: Flush the list.
Reset: Clear the settings.