User's Manual

81
4.2.2 Time Settings
System Configuration ->Time Settings
It synchronizes the date & time of PC to device. Enable NTP (Network time protocol) for clock
synchronization to device. If NTP is not enabled then user must enter the date and time
manually.
Fields Description
Enable NTP Enable NTP so that time & date will be updated correctly even after reboot.
Server Name Enter the NTP server Name
NTP request interval NTP updating time interval. By default its 24.
Local Time Zone Select the Time zone of your country from pull-down menu.
Local date and time Enter the month, date, year, hours, Minutes and seconds, AM/PM Manually to
set date and time.
Sync with PC It Synchronizes the new settings of date and time to your computer.
Save & Start It Saves the settings and starts.