User's Manual

85
4.2.6 Firmware Upgrade
System Configuration -> Firmware Upgrade
Upgrade the device firmware to obtain new functionality. It takes about 1minute to upload new
version. Click the Browse button to select the path and filename for the firmware, and then
click the UPGRADE button to upgrade firmware.
Note: Please do not off the power or remove the Ethernet cable connected to LP-2396K when
firmware upgrade is in process. Otherwise, it will probably cause system crash.
Caution! A corrupted file will hang up the System
4.2.7 Save and Restore
System Configuration -> Configuration Save and Restore
You can save system configuration settings to a file, and later download it back to the LP-2396K
by following the steps.
Save: Press Save button to save the current configuration settings of the device to the
Management Host or click the Browse button to locate the configuration file,
Restore: click the RESTORE button to restore the system configuration from the specified file.