User's Manual

89
4.3.2 Network Traceroute
Once the Network Ping has been used to determine basic connectivity, the Network traceroute
can used to determine more specific information about the path to the destination host
including the route the packet takes and the response time of these intermediate hosts. If you
execute the Traceroute command on a source device, it sends IP packets toward the destination
with Time To Live (TTL) values that increment up to the maximum specified hop count. This is 30
by default on most systems.
Fields Description
Destination IP Address
Enter the IP address to which you like to know the trace route.
Max Hop Maximum number of routes.
Result It displays the result
Traceroute: Click it to trace the route.
Stop: Stop the Traceroute.