- Travis Owner's Manual Burner DVL Insert EF II

Installation (for qualified installers only) 11

Face Sizing

Face Height Width Notes

Rawhide 27” 35-3/4”

Victorian 27” 35-3/4”

Rosario 26” 35-3/4”

Cambridge 25-7/8” 37-5/8”

Craftsman 27-1/2” 36”

Bungalow 27” 32-3/4”

Classic Arched, Artisan 26-1/2” 34-3/4” Side begins arch 3-1/2” below top - 45” radius

Metropolitan 26-1/2” 34-3/4”

Architectural Series 27-7/8” 33-5/8”

Discovery 26’ 35-3/4’

Wilmington 27” 36-1/8”

Face Mounting Brackets – Arched, Artisan, Metropolitan, Victorian Lace

Some Arched, Artisan, Metropolitan and Victorian Lace Faces include old brackets that will not

mount to the heater (see illustration below). For these faces, make sure to use the new mounting

brackets (either included with the heater or available through your dealer - SKU 225-20054).

WARNING: When attaching the Victorian Lace Face, do not over-tighten the screws. Over-

tightening the screws may damage the face – simply tighten the screws until they contact the face.

New Brackets Old Brackets

Install the face mounting

brackets with the included nuts.

NOTE: The brackets install into the

lower pair of holes on the insert.

NOTE: The brackets

install with this pair of

closely spaced flanges at

the top.