Installation Guide

Guarantee Repairs Claims
1.
Within warranty period, LORDEAR is responsible for
repairing any
defective product for free.
2. Please contact seller by email with this warranty a
nd purchase invoice
when the product needs guarantee repairs within war
ranty period.
3.
Within warranty period, the listed situations below need to pay for
replacement.
3.1
The malfunction and damage caused by improper use and repair or
reconstruct unauthorized. (forbid any throw, beat behavior)
3.2
The malfunction and damage caused by not refer to instruction during
installation.( forbid any unprofessional plumber install this product)
3.3 The malfunction and damage caused by removing after installation or
other factors.
3.4
The malfunction and damage caused by application beyond the scope
of usage.
3.5
The damage caused by sands or dirty hands.
3.6
The damage caused by daily improper maintenance and rust on
finished and so on.
3.7 The malfunction and damage caused by fires, earthqu
akes, floods,
lightning and natural disasters, pollution, harmful gas, salt and
abnormal voltage and other reasons.
3.8
The occasions which purchase invoices are not presented.
4. This limited warranty applies only to the original purchaser and hotel
business. It expressly excludes labor charges, removal charges, installation,
or other incidental or consequential costs. Any inappropriate application
will void the warranty.
5. This warranty can no be replaced if missed, please keep safe.
6. After-sales service e-mail:[e-mail] or call at 303-397-6818.
6/6
4 Connect Supplies
Connect hot water supply to longer of the two flexible supply hoses and cold water supply to
shorter of these hoses. Flexible supply hoses are complete with 3/8” compression fittings for
your convenience. With all pipe attachments plumbers tape can be utilized to help reduce the risk
of leaking.
5 Flush Lines
Pull the sprayer out to partially expose the hose. Position the hose in the sink. Tie or tape the
hose to the sink to prevent it from sliding back into the faucet. Remove the aerator.
Turn on the hot and cold water supply lines. Turn the faucet handle to the cold side and lift the
handle to the “on” position. Run the water for one minute to remove any potential debris. Rotate
handle to the warm side and run for a minute. During this process watch for any water leaks in
the pipe. Reinstall the aerator.
5/6