Installation Guide

2
1
Rated Voltage
110-120V~
Rated Power
1150W
Waterproof Level
IPX4
Flush volume
1.28gpm(4.8Lpm)
* Power value testing condition: Water Pressure: 29PSI(0.2MPa), Inlet Water
Temperature: 59°F, Water Flow: 0.17gpm(650ml/min).
Max temperature of the water supplied by the product for hygiene: 107°F
There will be no further notice if any technical specification changed due to
product improvement and technical update, all real technical specification
should be subject to the final product.
Environment
Temp.
41-104°F
Rated Frequency
60Hz
Warm Water
Temp.
Warm Air
Temp.
Heated Seat
Temp.
4 levels
(Room Temperature- 104°F)
4 levels
(Room Temperature- 105°F)
Water entry
temperature
4 levels
(Room Temperature- 140°F)
Technical Specification
Warm Water
Heating Method
Instant Heating
Supply Water
Pressure
26-73 PSI (0.18MPa-0.5MPa)
Specifications
Product Name
Smart Toilet
CAUTIONS AND WARNINGS
SAVE THESE INSTRUCTIONS
Please read this statement completely and correctly use it.
Please strictly comply with written cautions and warnings.
● Meaning of the Marks:
DON’T:This symbol indicates a prohibited use of the product.
MUST:This symbol is used to indicate a required step in the use of this product.
Never disassemble, repair or alter. Do not use tools in places
other than designated.
● Doing so may cause fire, electrical shock, overheating, short
circuit or breakdown.
Do not get any water or cleaning solution on the main unit or
connection of power cord.
● Doing so may cause fire, electricalshock, heat or short circuit.
● Doing so may cause the product to crack resulting in injury or
water damage.
Do not use the product if a malfunction occurs.
●Continued use after malfunction could cause a fire, electric
shock, heat, short circuit, injury or water damage. Please
contact to the professionals.
●The recommended service life of smart toilet is 7 years. Please
pay attention to the toilet working conditions after 7 years
Don’t
disassemble
Don’t
splashwater
DON’T
*
33.8-95°F
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Use tap water only
Doing so may cause irritation to the skin and malfunction.
●In case of breakdown or other problems, be sure to cut off power
by flipping the power switch to OFF. Close the water shutoff
valve to stop water supply.
Possible malfunctions:
-Water is leaking from a pipe or the main unit.
-The product is cracked or broken.
-The product makes a strange noise or emits a strange odor.
-The product emits smoke.
-The product is abnormally hot.
-The toilet seat cushion is out of place.
- Continued use after malfunction could cause a fi re, electric
shock, heat, short circuit, injury or water damage.
Minimum Water
Pressure
26PSI, and the minimum water flow should be 5.3gpm
Codes/
Standards
ASME A112.19.2-2018/CSA B45.1-18
ASME A112.4.2-2021/CSA B45.16:21
●
●