Installation Guide

12
11
Pairing the Remote Control to the Toilet
The remote control cannot be paired to the toilet while the toilet is occupied. For
proper operation, follow the steps by different style below to confirm that the remote
control and toilet are pairing.
●Side Control Panel Style:Press and hold " REAR WASH " icon on the left side of the
toilet for 3 seconds, a short beep indicates that paring status is activated.
Press any icon on the remote control to finish paring.
●Side Control knob Style: Turn and hold the control knob to the rear wash side for
3 seconds, a short beep indicates that paring status is activated. Press any icon
on the remote control to finish paring.
To activate features using the remote control, the remote must be paired with the
toilet.
Control DescriptionControl Description
Auto Open/Close Lid by Foot Sensor (Foot Kick)
(This feature is unique to the automatic open lid model)
The lid automatically opens as the user approaches the product within 1m.
(The original state of the lid should be closed)
Auto Flushing by Foot Sensor (Foot Kick)
(This feature is unique to the toilet which flushing by foot sensor
/foot kick.)
1. Flushing by foot sensor
When enabled, the toilet automatically flushing when the side motion sensor
light on the right side of the toilet senses the movement of foot (within 10cm).
2. Flushing by foot kick
When enabled, the toilet automatically flushing when the side kick switch on the
right side of the toilet kicked by foot.
2.Auto open/close the lid by foot kick
When the lid is closed, the lid automatically open if the side kick switch
on the right side of the toilet kicked by foot. When the seat is closed, the seat
automatically open if the side kick switch on the right side of the toilet kicked by
foot.When the seat is open, the seat automatically close if the side kick switch
on the right side of the toilet kicked by foot. When the lid is open, the lid will
automatically close after the user leave.
1.Auto open/close the lid by foot sensor
When the lid is closed, the cover will automatically open if the side motion
sensor light on the right side of the toilet senses the movement of foot. When
the seat is closed, the seat will automatically open if the side motion sensor
light on the right side of the toilet senses the movement of foot. When the seat
is open, the seat will automatically close if the side motion sensor light on the
right side of the toilet senses the movement of foot. When the lid is open, the lid
will automatically close after the user leave.
Toilet Bowl Moisture
When the toilet is standby, please do as follow to activate the moisture function.
Side Control Panel Model: To open or close the function of " Toilet Bowl Moisture " ,
please press and hold the button of " STOP " and " DRYER " at the same time for
3seconds until the beep.
Side Control Knob Model: To open or close the function of " Toilet Bowl Moisture " .
Turn and hold the knob to " REAR WASH " side for 3seconds until the beep, then
press the " FLUSH " button on the remote control within 2seconds.
Motion-Activated Open/Close Lid
(This feature is unique to the automatic flip toilet)
When enabled, the lid automatically open/close when the toilet front motion
sensor senses user’s motion such as [near], [using] or [leaving].