Operation Manual

114
User Manual
Fig. 5.11.3.1 - PTX icon
All menus and/or pages are closed and the chart is centered on the PTX
received position. The Audible Alarm starts beeping and a pop-up warning window
appears to notify that a PTX has been received:
MOBILARM
33°27.090N
220°34.020W
Id Time
000001A0
10:16:29 PM
Fig. 5.11.3.2 - Example of PTX warning message
It is possible to navigate to the received PTX (see Par. 5.11.4.2) and open the
MOBILARM PTX List Page (see Par. 5.11.4.3). Both Goto and List functions also
mute the Audible Alarm.
Note
The List function is active if more than one PTX is store.
5.11.3.2 PTX is received again
When PTX has beeen received again, it is already present on the chart plotter
memory.
If the received PTX is NOT the active one, the user must confirmed to navi-
gate to it.
Otherwise if the received PTX is the active one (the PTX on which we are
navigating to), navigation data are updated in memory, the new PTX coordinates
becomes the Destination position and the current Fix position becomes the starting
position. The map is not automatically centered on it.
The PTX icon appears at the new position and a pop-up warning window
appears. It is possible to close all menus/data pages (if open) and center the chart on
the received PTX (see Par. 5.11.4.4). Otherwise you could close the alarm window
and stay on the active screen.