Operation Manual

115
User Manual
5.11.4 MOVING CURSOR ON THE PTX ICON
Placing the cursor on the PTX icon shown on the screen, an information
window containing the PTX Identifier, position and status (Overboard or Recov-
ered) appears:
MOBILARM - PTX
OVERBOARD
41°13.334N
009°30.702E
Id Time
000001A0
10:16:79 PM
Fig. 5.11.4 - Example of PTX information window
5.11.4.1 Deleting PTX
The Delete PTX function permanently removes the selected PTX from the
chart plotter memory and from the chart display.
Move the cursor over the PTX to delete. Press 'ENTER', using the cursor
select "DELETE" and press 'ENTER'. A warning pop-up window will be shown.
Select "YES" and press 'ENTER'.
5.11.4.2 Goto PTX
The Goto PTX function activates the navigation to the selected PTX.
Place the cursor on PTX cursor. Press 'ENTER', using the cursor select
"GOTO" and press 'ENTER'.
If the navigation is set to the selected PTX, to terminate the navigation press
'ENTER', using the cursor select "STOP GOTO" and press 'ENTER'.
5.11.4.3 MOBILARM PTX List Page
The MOBILARM Alarm Status List shows the list of all PTX that returned
an alarm event. To obtain the page press 'ENTER', using the cursor select "LIST"
and press 'ENTER'.