Operation Manual

120
User Manual
6.1 SETTING THE INTERNAL FISH FINDER ON
The internal Fish Finder driver is connected directly to the dedicated serial
Port2.
To switch the internal Fish Finder transmission On follow the procedure:
'MENU' + "BASIC SETTINGS" + 'ENTER' + "INPUT/OUTPUT" + 'ENTER' +
"FISH FINDER" + 'ENTER' + "ON" + 'ENTER'
Note
It is not possible to connect any external Fish Finder unit to the chart plotter.
6.2 UNDERSTANDING THE FISH FINDER PAGE
The display on chart plotters shows a history of time of the echoes received
by the transducer. The chart plotters have a menu that allows adjustments to re-
ceiver sensitivity, depth range and scrolling speed of the Fish Finder display.
Fig. 6.2 - The Fish Finder page
The following is a short description of terms listed in the previous Fig. 6.2:
Warning Message
Flashing label "Simulation" when the echo sounder is in Simulation mode.
Echogram window
Graphic presentation of sonar soundings recorded as a continuous profile scrolling
across the screen from right to left. Such recordings represent the image of the
water beneath your boat, items appear as they pass under your transducer; the
items on the right side of the screen are closer to you than those on the left. The