Operation Manual

156
User Manual
2. Then, following template instruction, drill a 1" (25mm) hole and three
0.13" (3.2mm) holes.
GPS OVERALL SHAPE
Ø3.2mm [0.13”]
Ø25m
m
[1
”]
Fig.B.1a - Installing GPS Antenna (II)
3. Remove the template and let the cable go through the central hole.
4. Apply a small coat of RTV to the underside of the antenna.
5. Place the antenna and then screw it with the three M3 screws.
Fig.B.1b - Installing GPS Antenna (III)
B.2 DIMENSIONS
60mm [2.63"]
41mm [1.61"]
98mm [3.86"]
Fig.B.2 - GPS Antenna Dimensions