Operation Manual

21
User Manual
2
Before You Begin
This chapter provides basic information to get you start using the chart plotter;
it will help you to become familiar with the chart display and the functions of the
controls before you start using the chart plotter.
2.1 THE KEYBOARD
The 'CONTRAST'/'BACKLIGHT'/'POWER' key
Press and hold for 1 second 'POWER' to turn the chart plotter On. Press
and hold 'POWER' down (once the chart plotter has been turned On) for 3 seconds
turns the chart plotter Off.
Press and immediately release 'POWER' to adjust the backlight and the con-
trast of the display.
The key
Press 'MENU' to select the Main Menu.
The key
Place the cursor and press 'GO-TO' to set Target.
The key
Press 'PAGE' to select the configuration you wish.
The key
Press 'MODE' to select Charting or Navigation (Home).
Nota
If the "Selectable Nav 3D" item in the Navigation menu (see Par. 5.3) is set, by pressing 'MODE' it