Operation Manual

User Manual

3.2.6 UNITS SELECTION

Allows to select the preferred unit for Distance, Speed, Depth and Altitude

(altitude of GPS Antenna on the medium sea level).

Speed: Kts(knots)/Mph(miles per hour)Kph(chilometres per hour). The default setting

is Kts.

'MENU' + "BASIC SETTINGS" + 'ENTER' + "SPEED" + 'ENTER'

Distance: Nm(Nautical Miles)/Sm(statute miles)Km(chilometres). The default setting

is Nm.

'MENU' + "BASIC SETTINGS" + 'ENTER' + "DISTANCE" + 'ENTER'

Depth: Ft(Feet)/FM(Fathoms)/Mt(Meter). The default setting is Mt.

'MENU' + "BASIC SETTINGS" + 'ENTER' + "DEPTH" + 'ENTER'

Altitude: Ft(Feet)/FL(Flight Level)/Mt(Meter). The default setting is Mt.

'MENU' + "BASIC SETTINGS" + 'ENTER' + "ALTITUDE" + 'ENTER'

Temperature: °C/°F. The default setting is °C.

'MENU' + "BASIC SETTINGS" + 'ENTER' + "TEMPERATURE" + 'ENTER'

3.2.7 NAV AIDS PRESENTATION

Allows to set the Nav Aids presentation as US or International. The default

setting is International. When selected it affects Lights, Signals, Buoys & Beacons

display.

• International: Draws Nav-Aids using international symbology. All compo-

nents of Complex Objects are shown.

• US: Draw Nav-Aids using NOAA symbology. All components of Complex

Objects are shown.

'MENU' + "BASIC SETTINGS" + 'ENTER' + "NAV AIDS PRESENTATION" +

'ENTER'

3.2.8 INPUT/OUTPUT MENU

WARNING !!!

After every software upgrade the RAM is cleared and the chart plotter re starts with the usual

default settings. Please go to the Input/output menu and set the proper input format once again.

3.2.8.1 Port 1/Port 2/Port 3 Input

Sets or disables the format for the navigation data input serial Port1/2/3.