Operation Manual

User Manual

Restart GPS

Restarts all GPS processes. Once executed, the message "Done" is shown.

'MENU' + "BASIC SETTINGS" + 'ENTER' + "INPUT/OUTPUT" + 'ENTER' +

"GPS SETUP" + 'ENTER' + "RESTART GPS" + 'ENTER'

Differential Correction Source

Allows setting what kind of Differential Correction will be used by the GPS be-

tween WAAS-EGNOS and RTCM (beacon correction). The default setting is WAAS-

EGNOS.

'MENU' + "BASIC SETTINGS" + 'ENTER' + "INPUT/OUTPUT" + 'ENTER' +

"GPS SETUP" + 'ENTER' + "DIFF CORRECTION SOURCE" + 'ENTER'

Navigation Speed

Allows setting the Navigation Speed among Low Speed, Medium Speed and High

Speed.

'MENU' + "BASIC SETTINGS" + 'ENTER' + "INPUT/OUTPUT" + 'ENTER' +

"GPS SETUP" + 'ENTER' + "NAVIGATION SPEED" + 'ENTER'

3.2.8.5 Send & Receive Marks/Routes

Sets the desired port used for transferring User Points and Routes functions:

'MENU' + "BASIC SETTINGS" + 'ENTER' + "INPUT/OUTPUT" + 'ENTER' +

"SEND/REC ROUTES & MARKS" + 'ENTER' + "Port1/Port2/Port3" + 'ENTER'

3.2.8.6 C-Link

Selects the Master unit (Primary Station) or the Slave unit (Secondary Station):

'MENU' + "BASIC SETTINGS" + 'ENTER' + "INPUT/OUTPUT" + 'ENTER' +

"C-LINK" + 'ENTER' + "Secondary Station/Primary Station" + 'ENTER'

3.2.8.7 Cable Wiring Page

Shows a window containing the interface cable wiring. See Par. 6.3 and 6.4.

'MENU' + "BASIC SETTINGS" + 'ENTER' + "INPUT/OUTPUT" + 'ENTER' +

"CABLE WIRING" + 'ENTER'

3.2.8.8 Fish Finder Transmission F

SKY

X5 F

ISH

& C

OMPACT

FISH

The Fish Finderinternal is connected directly to the Port 2. To switch the

internal Fish Finder transmission On/Off follow the procedure:

'MENU' + "BASIC SETTINGS" + 'ENTER' + "INPUT/OUTPUT" + 'ENTER' +

"FISH FINDER + 'ENTER'