Operation Manual

User Manual

Fig. 3.3.1 - A-B-C-D points

Note

Press 'A-B-C-D' to select the A_B_C_D function (if 'FUNCTION' is set as 'A-B-C-D' - see Par. 2.1)

3.3.2 DELETING THE A-B-C-D POINTS

Place the cursor on the desired point (A, B, C or D) and press 'CLEAR': the

point is deleted. When the point is deleted, the cursor is placed on the previous

point, if existed. The labels of the next points are renamed.

3.3.3 NAVIGATING ON THE A-B-C-D POINTS

If fix received is good, place the cursor on the desired point A, B, C or D and

press 'GO-TO'. When the ship arrives to the Destination point, navigation follows

to the next point (if existed).

3.4 NAVIGATING TO A SINGLE DESTINATION

3.4.1 DISTANCE AND BEARING TO TARGET (DESTINATION)

Once you have positioned the cursor on your desired location (a generic

point on the map) press 'GO-TO'. On the screen is shown a straight line connecting

the Target (called DEST) with the ship's position and an information window with

Target position, that disappears when the cursor is moved from the Target. When

the Target is placed, all navigation data are referred to this Target.

Note

When the chart plotter is turned Off, the Target does not remain in memory.