Operation Manual

User Manual

• Off-line redraw (cartography level transition without image construction)

Cartographic Data related Features

• Guardian Alarm (automatic control and alarm over obstacles on charts in front

of your boat)

• Safety Toolbar (interactive alarm system for situational awareness on screen)

• Safety Route Check (sophisticated function checking dangerous objects along

your navigation route)

MAX and NT/NT

C-CARD coexistence

• When NT

data and MAX data cover different areas, the chart plotter gets

data from both charts (depending on the current position).

• When NT

data and MAX data cover the same area, the chart plotter gets

data only from MAX chart.

3.5.1 MAP SETTINGS MENU

It is possible to select the Map Settings Menu following the procedure:

'MENU' + "MAP SETTINGS" +'ENTER'

3.5.1.1 3D View (Perspective View)

'MENU' + "MAP SETTINGS" +'ENTER' + "3D View" + 'ENTER'+ "ON" +

'ENTER'

or:

'MODE' more times (if set by menu, see Par. 5.3)

Note

If selected using the 'MODE' key, an information window describing the newly selected mode is

shown on the center of the screen for about 2 seconds, see also Par. 2.1.

Chart data may be projected in perspective mode (3D) during navigation.

This function allows setting the panoramic View of the chart. As the upper side of

the map is more compressed than the lower side, a wider map area is visible. The

perspective view allows showing more chart information immediately ahead and

around the cursor. The default setting is Off.