Operation Manual

53
User Manual
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "SETUP" + 'ENTER' +"AUTO
INFO" + 'ENTER'
The possible settings are:
• Off: disabled, no automatic info shown at all.
• On Points: only on points. This is the default setting.
• On All: on all objects (points, lines and areas).
The Automatic Info On Points shows information when the cursor is placed
on points (as Port Services, Tides, lights, wrecks, rocks, buoys, beacons, obstruc-
tions, land markers, etc.). The Automatic Info On All shows information when the
cursor is placed on points, on lines (as Depth contours, Traffic Separation, Territo-
rial Sea, Cartographic Lines etc.) on areas (Depth, Built-up, Sea, Attention, Restricted
etc.) and on names (on the beginning of the text -hot spot- or on any of the characters
of the name -name message box-). The details on Land, Source of Data, Cartographic
Area and Spot Soundings are not shown.
Fig. 3.5.2 - Automatic Info on Points window
If you press 'ENTER' you get the information about that object.
3.5.2.1 Info on objects with Pictures
On the Quick Info, there will be the camera icon on the top bar of
the window if at least one of the objects found has one or more pictures
associated.
Fig. 3.5.2.1 - Example of Quick Info on objects with picture
On the Full Info, there will be the small camera icon on a corner of the
square containing the object icon or a big photo icon centered on the square for the