Operation Manual

User Manual

For the Experienced User

Now you have had a chance to became familiar with your new chart plotter,

there are a great number of advanced features that you will find helpful. First of all

the use of the Advanced Mode.

The chart plotter can operate in two different modes: Basic Mode and Ad-

vanced Mode. In the first mode there is a restricted number of functions, while in

Advanced Mode it is possible to have more available functions, for example it is

possible to handle Waypoints. To select the Advanced Mode:

'MENU' + "BASIC SETTINGS" + 'ENTER' + "ADVANCED FUNCTIONS" +

'ENTER' + "ON" + 'ENTER'

When Advanced Functions is Off the chart plotter operates in Basic Mode.

4.1 MORE ABOUT CREATING AND USING ROUTES

At anytime, you may add or delete Waypoints, see a route summary, reverse

the direction of the route or erase the entire route.

4.1.1 WAYPOINT

You may add Waypoints, delete Waypoints from a route, move any Way-

point in the route to another location, insert a Waypoint between two existing ones,

find any Waypoint at anytime. Every time you place the cursor on a Waypoint the

following functions are available.

4.1.1.1 Adding Waypoint

Select Advanced Mode + 'ENTER' + "WAYPOINT" + 'ENTER'

or:

'WAYPOINT' (if it is present)

The Waypoint appears on the cursor position. An info window is shown