Operation Manual

68
User Manual
Fig. 4.1.1.7 - Placing Waypoint between two existing ones (I)
Press 'ENTER'. Select "INSERT" and press 'ENTER'. The line between the
two Waypoints is turned into a dotted line: move the cursor to the new position.
When the cursor is stationary for one second or two, the line will "rubber-band",
drawing a dotted line between the last Waypoint and the cursor, and another dotted
line between the cursor and the next Waypoint:
Fig. 4.1.1.7a - Placing Waypoint between two existing ones (II)
Once you have positioned the cursor at new location, press 'ENTER' (press
'CLEAR' to abort operation):