Operation Manual

User Manual

Deleting selected User Point

'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "USER POINTS" + 'ENTER' +

"CLR-ONE' + 'ENTER'

Deletes the selected User Point. A warning message appears, select "YES" and press

'ENTER' ('CLEAR' otherwise).

Deleting all User Points with the same symbol

'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "USER POINTS" + 'ENTER' +

"CLR-SYM' + 'ENTER'

Deletes all User Points which have the same identifier of that shown in the selected row.

A warning message appears, select "YES" and press 'ENTER' ('CLEAR' otherwise).

Deleting all User Points with the same type

'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "USER POINTS" + 'ENTER' +

"CLR-TYP' + 'ENTER'

Deletes all User Points which have the same type of that shown in the selected row.

A warning message appears, select "YES" and press 'ENTER' ('CLEAR' otherwise).

Deleting all stored User Points

'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "USER POINTS" + 'ENTER' +

"CLR-ALL' + 'ENTER'

A warning message appears, select "YES" and press 'ENTER' ('CLEAR' otherwise)

to delete all stored User Points.

Send/Receive User Points

Sends all User Points to an external device using the serial port:

'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "USER POINTS" + 'ENTER' +

"SEND"

Reads all User Points from NMEA Input port:

'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "USER POINTS" + 'ENTER' +

"RECEIVE"

4.1.2 ROUTES

The following functions are used for the route management. The chart plotter

handles routes from 1-25, which are permanently stored in the memory as they are

created. Only one route can be selected for work at any one time.

4.1.2.1 Selecting route

'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ROUTE" + 'ENTER' +

"CURRENT ROUTE" + 'ENTER'