Operation Manual

73
User Manual
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ROUTE" + 'ENTER' +
"RECEIVE"
The received route is saved on the active route, overwriting it. The NMEA
WPL & RTE messages are sent to the input port.
4.1.2.7 Finding information on a route: Route Report
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ROUTE" + 'ENTER' +
"ROUTE REPORT" + 'ENTER'
If there are more than 8 Waypoints shown, use the cursor key to select another
page.
Waypoint number
Leg Distance
(Distance between the
Waypoint and the previous one)
Total Distance
(Distance from the first
Waypoint of the route)
Waypoint position
Bearing
Fuel consumption between the
Waypoint and the previous one
Navigation time from the
Waypoint and the previous one
Fig. 4.1.2.7 - Route Data Report page
Selecting route
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ROUTE" + 'ENTER' +
"ROUTE REPORT" + 'ENTER' + "SELECT" + 'ENTER'
Use the cursor key to select the route number and press 'ENTER'. The route, shown
by straight segments, is centered on the screen, with the cursor on the central Way-
point. See also Par. 4.1.2.1.
Note
If there is the Target in the current route, it is not possible to change the current route. So if the
"Select" item is selected, the chart plotter emits three beeps.
Route name
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ROUTE" + 'ENTER' +
"ROUTE REPORT" + 'ENTER' + "ROUTE NAME" + 'ENTER'
Use the cursor key to insert the route name (max 16 alphanumeric char.).
Route color
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ROUTE" + 'ENTER' +
"ROUTE REPORT" + 'ENTER' + "ROUTE COLOR" + 'ENTER'