Operation Manual

User Manual

4.2.1.1 Adding Mark

Select Advanced Mode + 'ENTER' + "MARK" + 'ENTER'

or:

'MARK' (if it is present)

The new Mark appears on your cursor position. An info window containing

Mark name, symbol and Latitude/Longitude is shown.

4.2.1.2 Deleting Mark

Select Advanced Mode + Place cursor on Mark

Press 'ENTER'. Select "DELETE" and press 'ENTER': the Mark remains

on the screen shaded until the next screen is redrawn.

Note

If you try to delete a Mark that belongs to many routes, the chart plotter emits three beeps and on

the screen a Warning message appears. If you want to delete the Mark, press 'ENTER'.

4.2.1.3 Goto

Place cursor on Mark

Press 'GO-TO': a circle encloses the Mark symbol. A straight line is shown

on the screen connecting the Target with the ship's position. When the Target is

placed, all navigation data are referred to this Target.

4.2.1.4 Moving Mark

Select Advanced Mode + Place cursor on Mark

Press 'ENTER'. Select "MOVE" and press 'ENTER'. Move the cursor

by the cursor key, a dotted line connecting the Mark with the new position is

shown:

Fig. 4.2.1.4 - Moving Mark function (I)

Press 'ENTER':