Operation Manual

User Manual

Fig. 4.2.1.4a - Moving Mark function (II)

The Mark is placed in the new position, the "old" Mark, remains on the

screen shaded until the screen is redrawn.

Note

If you try to move a Mark that belongs to many routes, the chart plotter emits three beeps and on

the screen a Warning message appears. If you want to move the Mark, press 'ENTER'.

4.2.1.5 Editing Mark

Select Advanced Mode + Place cursor on Mark

Press 'ENTER'. Select "EDIT" and press 'ENTER'. A window appears to

modify Name, Symbol, Color and coordinates of the existing Mark.

Fig. 4.2.1.5 - Edit Mark

Use the cursor key to select the field. If you have selected Name field, press

'ENTER': use the cursor key to insert the character (8 characters max), then press

'ENTER'. If Symbol field is selected press 'ENTER': a window with 16 different

symbols appears. Use the cursor key to select the symbol and press 'ENTER'. If

Coordinates field is selected, press 'ENTER' and then use the cursor key to insert the