Operation Manual

User Manual

value. If Color field is selected press 'ENTER': a window with 8 different colors

appears, use the cursor key to select the desired color and press 'ENTER'. Then press

'CLEAR'.

4.2.1.6 Finding information on Marks: User Points List page

'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "USER POINTS" + 'ENTER'

A full window is opened showing information about all stored User Points

(Marks, Events and Waypoints). Move up/down the cursor key to select the User

Point you wish. If the page contains more than 8 User Points, the list continues in

the next pages. See Par. 4.1.1.9.

4.2.1.7 Add to Route

Select Advanced Mode + Place cursor on Mark

Press 'ENTER'. Select "ADD TO ROUTE" and press 'ENTER': the se-

lected Mark is connected to the current route. The same Mark can be added in many

routes.

Note

An existing Mark can be connected to the current route in another mode too. Place cursor on

Mark, the information window related to the Mark appears, press 'CLEAR' to close the window

and then press 'ENTER', select the Waypoint option and press 'ENTER'. The Mark is connected

to the current route.

4.2.2 EVENTS

In Navigate mode you may place a location with an Event symbol and number,

directly on the ship's position. Move the cursor to exit from Navigate mode; place

the cursor on an Event to access the following functions.

4.2.2.1 Adding Event

Select Advanced Mode + 'MODE', then 'ENTER' + "EVENT" + 'ENTER'

or:

'EVENT' (if it is present)

An Event is placed directly on the ship's position.

4.2.2.2 Deleting Event

Place cursor on Event

Press 'ENTER'. Select "DELETE" and press 'ENTER': the Event remains

on the screen shaded until the next screen is redrawn.

Note

If you try to delete a Event that belongs to many routes, the chart plotter emits three beeps and

on the screen a Warning message appears. If you want to delete the Event, press 'ENTER'.