Operation Manual

User Manual

is connected to the current route. The same Event can be added in many routes.

Note

An existing Event can be connected to the current route in another mode too. Place cursor on

Event, the information window related to the Event appears, press 'CLEAR' to close the window

and then press 'ENTER', select the Waypoint option and press 'ENTER'. The Event is connected

to the current route.

4.3 EBL & VRM FUNCTION

EBL & VRM function enables to create a dotted line and a circle respectively

with direction and radius determined by the user.

4.3.1 PLACING EBL & VRM

Select Advanced Mode + 'ENTER' + "EBL & VRM" + 'ENTER'

or:

'EBL-VRM' (if it is present)

On the screen a dotted line and a circle appear: you can move in any direction

you choose rotating the trackball. When the desired position is selected, press

'ENTER'. A window is shown containing the bearing value for the EBL and the

radius value for the VRM.

Fig. 4.3.1 - EBL & VRM

4.3.2 DELETING EBL & VRM

Select Advanced Mode + Place cursor on the cross EBL & VRM + 'ENTER'

Select "DELETE" and press 'ENTER': the line and circle disappear from the

screen.