Operation Manual

82
User Manual
4.4.4 MOVING THE A-B-C-D POINTS
When placing the cursor on the desired point (A, B, C or D) the information
window appears. Press 'ENTER', select "MOVE" and press 'ENTER': by the cursor
key move the cursor, on the screen a dotted line connecting the point to move with the
new position appears. By pressing 'ENTER' the point is placing in the new position.
4.4.5 INSERTING THE A-B-C-D POINTS
Placing cursor on the segment connecting two points, the information win-
dow appears. Select "INSERT" and press 'ENTER': by the cursor key move the
cursor, on the screen a dotted line appears. By pressing 'ENTER' the new point is
placing between the two existed points which are renamed.
4.4.6 NAVIGATING ON THE A-B-C-D POINTS
If fix received is good, place the cursor on the desired point A, B, C or D and
press 'GO-TO'. When ship reaches the Destination point, navigation follows the
next point (if exists). When Target is set, three options are available: STOP NAV,
NEXT and PREV.
4.5 USING THE TRACK FUNCTIONS
As long as the chart plotter is connected to a positioning instrument, it stores
all points in its memory. The chart plotter can store a fix when the distance from its
last stored position is greater than a defined distance or after a defined time. A line
connects such points and represents the past course, called the track of the ship.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "TRACK" + 'ENTER'
4.5.1 SELECTING ACTIVE TRACK
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "TRACK" + 'ENTER' +
"ACTIVE TRK" + 'ENTER'
Select the number of the active track. The default setting is 1.
4.5.2 ENABLING TRACK STORING
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "TRACK" + 'ENTER' +
"TRACKING" + 'ENTER'