Operation Manual

83
User Manual
To enable (On) or disable (Off) the track storing. It is not possible to use the
track storing if you are not receiving a valid fix. The default setting is On.
4.5.3 DISPLAYING TRACK
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "TRACK" + 'ENTER' +
"VISIBLE" + 'ENTER'
To enable (On) or disable (Off) the displaying of track. The default setting is On.
4.5.4 SELECTING TRACK COLOR
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "TRACK" + 'ENTER' +
"COLOR" + 'ENTER'
Select the desired color among the 8 colors available for the selected track.
4.5.5 DELETING TRACK
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "TRACK" + 'ENTER' +
"DELETE" + 'ENTER'
Deletes the all track storing. After pressing 'ENTER' a warning window
appears: select "Yes" and press 'ENTER' to confirm (select "No" otherwise).
4.5.6 DELETING SELECTED TRACK
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "TRACK" + 'ENTER' +
"DELETE SELECTION" + 'ENTER'
Deletes the track selected. After pressing 'ENTER' a window appears: press
'ENTER' to set the first point , then press 'ENTER' to set the second point. A
warning window appears: select "Yes" and press 'ENTER' to confirm the deletion
(select "No" otherwise).
4.5.7 SELECTING TRACK MEMORIZING TYPE
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "TRACK" + 'ENTER' + "STEP
UNIT" + 'ENTER'
Choose Distance (Dist) - the chart plotter can store a fix when the distance
from its last stored position is greater than a defined distance; Time - the chart plotter
can store a fix after a defined time; Auto - the software decides when storing a posi-
tion, on the basis of the straight or curved track. The default setting is Time.