Operation Manual

User Manual

4.5.8 SELECTING DISTANCE

'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "TRACK" + 'ENTER' +

"DISTANCE" + 'ENTER'

When the tracking function is On and the type of track storing is Distance,

you can store a fix when the distance from its last stored position is greater than a

defined distance. Choose in the range 0.01, 0.05, 0.1, 0.5, 1.0, 2.0, 5.0, 10.0 Nm (the

distance unit is selected by the user, see Cap. 5). The default setting is 0.01 Nm.

4.5.9 SELECTING TIME

'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "TRACK" + 'ENTER' + "TIME"

+ 'ENTER'

When the tracking function is On and the type of track storing is Time, the

chart plotter can store a fix after a defined time. Choose among 1, 5, 10, 30 sec, 1, 5,

10 min. The default setting is 1 sec.

4.6 USER C-CARD MENU

The chart plotter allows to copy information to an User C-CARD. You can

also return the information to internal memory at a later time. This allows virtually

unlimited storage.

'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "USER C-CARD" + 'ENTER'

4.6.1 SAVING FILE

'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "USER C-CARD" + 'ENTER'

+ "SAVE" + 'ENTER'

A window is opened to insert the file name and the type of data to save.

Select the file name. At first a default name is shown: use the cursor key to insert the

name. Press 'ENTER'. Select the data type to save among "MARK", "EVENT",

"ROUTE" or "TRACK". Press 'CLEAR'.

Note

When naming a file, you may have trouble finding a name that uniquely identifies the file's

contents. Dates, for example, are often used in filenames; however, they take up several characters,

leaving you with little flexibility. The secret is to find a compromise, a point where you can

combine a date with a word, creating a unique filename. The maximum length of the filename

is 8 characters. The characters may be numbers (0, ..., 9), letters (A, ..., Z) and spaces (for example

legal identifiers are "ABC", "AA", "12121212", "A B C", "1 A 1", and so on.