Operation Manual

User Manual

4.6.2 LOADING FILE

'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "USER C-CARD" + 'ENTER'

+ "LOAD" + 'ENTER'

Before pressing 'ENTER', choose file name in the list shown on the screen

using the cursor key.

4.6.3 DELETING FILE

'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "USER C-CARD" + 'ENTER'

+ "DELETE" + 'ENTER'

A warning window is shown, select "YES" and press 'ENTER' to confirm

deletion (select "NO" otherwise). This operation remove old or unnecessary files to

clean up your User C-CARD. Remember that this option permanently erases the

file.

4.6.4 FORMATTING USER C-CARD

'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "USER C-CARD" + 'ENTER'

+ "FORMAT" + 'ENTER'

A warning window is shown, select "YES" and press 'ENTER' to confirm

the formatting (select "NO" otherwise). The format of User C-CARD must be done

before using a new User C-CARD: this operation prepares the User C-CARD to

receive and store information.

4.6.5 CHANGING USER C-CARD

'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "USER C-CARD" + 'ENTER'

+ "CHANGE" + 'ENTER'

Allows to change the User C-CARD.

4.7 C-LINK

C-Link system is a feature which allows to sharing the same cartographic

data between two chart plotter units linked via serial I/O port.

In order to activate C-Link function, a “MAX data C-CARD” (called REGU-

LAR C-CARD) must be inserted into one of the two chart plotters and a special

MAX data C-CARD (called MIRROR C-CARD) must be inserted on the other

chart plotter. The two MAX data C-CARDs must have the same code and revision.

So, the MIRROR C-CARD can be utilized only on a chart plotter linked to another