Operation Manual

99
User Manual
use the same values given by the chart plotter. This means that, for example, if the
BRG to the next Waypoint readout in the chart plotter display is "X" Mag degree, if
you steer the boat reading "X" Mag degree from the compass, you are driving well
toward the next Waypoint.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "COMPASS" + 'ENTER' +
"CALIBRATION" + 'ENTER'
5.5 ALARMS
The chart plotter provides alarm settings for various functions. Here you can
set the system for your navigational requirements.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ALARMS" + 'ENTER'
5.5.1 ARRIVAL ALARM
Sets an acoustic alarm to sound when the vessel is approaching the destination.
The default setting is Off.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ALARMS" + 'ENTER' + "AR-
RIVAL ALARM" + 'ENTER'
5.5.2 XTE ALARM
Sets an acoustic alarm to sound when the vessel is deviating from a defined
course. The default setting is Off.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ALARMS" + 'ENTER' + "XTE
ALARM" + 'ENTER'
5.5.3 ANCHOR ALARM
This function allows inserting of the limit of anchor dragging: beyond that,
the alarm is activated. The chartplotter computes the distance between the current
GPS position and the GPS position saved at the activation of the anchor alarm in the
menu. If the computed distance exceeds the value set in the menu, the chart plotter
shows the alarm message and starts the acoustic alarm. The default setting is Off.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ALARMS" + 'ENTER' + "AN-
CHOR ALARM" + 'ENTER'
5.5.4 DEPTH ALARM
Sets an acoustic alarm to sound when the received depth value (from the