Operation Manual

User Manual

To enable (On) or disable (Off) the track storing. It is not possible to use the track

storing if you are not receiving a valid fix. The default setting is On.

4.5.3 DISPLAYING TRACK

'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "TRACK" + 'ENTER' + "VIS-

IBLE" + 'ENTER'

To enable (On) or disable (Off) the displaying of track. The default setting is Off.

4.5.4 SELECTING TRACK COLOR

'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "TRACK" + 'ENTER' +

"COLOR" + 'ENTER'

Selects the desired color for the selected track.

4.5.5 DELETING TRACK

'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "TRACK" + 'ENTER' + "DIS-

TANCE" + 'ENTER'

Deletes all track. After pressing 'ENTER' a warning window appears: select "Yes"

and press 'ENTER' to confirm (select "No" otherwise).

4.5.6 DELETING SELECTED TRACK

'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "TRACK" + 'ENTER' +

"DELETE SELECTION" + 'ENTER'

Deletes the track selected. After pressing 'ENTER' a window appears: press

'ENTER' to set the first point , then press 'ENTER' to set the second point. A warning

window appears: select "Yes" and press 'ENTER' to confirm the deletion (select "No"

otherwise).

4.5.7 SELECTING TRACK MEMORIZING TYPE

'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "TRACK" + 'ENTER' + "STEP

UNIT" + 'ENTER'

Choose Distance (Dist) - the chart plotter can store a fix when the distance from its

last stored position is greater than a defined distance; Time - the chart plotter can store a fix

after a defined time; Auto - the software decides when storing a position, on the basis of the

straight or curved track. The default setting is Time.