Operation Manual

80 User Manual
4.5.8 SELECTING DISTANCE
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "TRACK" + 'ENTER' + "DIS-
TANCE" + 'ENTER'
When the tracking function is On and the type of track storing is Distance, you can
store a fix when the distance from its last stored position is greater than a defined distance.
Choose in the range 0.01, 0.05, 0.1, 0.5, 1.0, 2.0, 5.0, 10.0 Nm (the distance unit is selected by
the user, see Cap. 5). The default setting is 0.01 Nm.
4.5.9 SELECTING TIME
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "TRACK" + 'ENTER' + "TIME"
+ 'ENTER'
When the tracking function is On and the type of track storing is Time, the chart
plotter can store a fix after a defined time. Choose among 1, 5, 10, 30 sec, 1, 5, 10 min. The
default setting is 1 sec.
4.6 USER C-CARD MENU
The chart plotter allows to copy information to an User C-CARD. You can also
return the information to internal memory at a later time. This allows virtually unlimited
storage.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "USER C-CARD" + 'ENTER'
Fig. 4.6 -User C-CARD Menu
4.6.1 SAVING FILE
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "USER C-CARD" + 'ENTER' +
"SAVE" + 'ENTER'
A window is opened to insert the file name and the type of data to save: