Operation Manual

95
User Manual
5.5 ALARMS
The chart plotter provides alarm settings for various functions. Here you can set
the system for your navigational requirements.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ALARMS" + 'ENTER'
5.5.1 ARRIVAL ALARM
Specifies the radius of a circle around the Waypoint of a route: when your vessel
reaches this circle the alarm sounds. You can disable (Off) the Arrival Alarm or insert value.
The default setting is Off.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ALARMS" + 'ENTER' + "AR-
RIVAL ALARM" + 'ENTER'
5.5.2 XTE ALARM
Disables the XTE Alarm (Off) or selects the desired value. The default setting is
Off.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ALARMS" + 'ENTER' + "XTE
ALARM" + 'ENTER'
5.5.3 ANCHOR ALARM
This function allows inserting of the limit of anchor dragging: beyond that, the
alarm is activated. The chart plotter computes the distance between the current GPS position
and the GPS position saved at the activation of the anchor alarm in the menu. If the
computed distance exceeds the value set in the menu, the chart plotter shows the alarm
message and starts the acoustic alarm. The default setting is Off.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ALARMS" + 'ENTER' + "AN-
CHOR ALARM" + 'ENTER'
5.5.4 DEPTH ALARM
Specifies the depth or disables the Depth Alarm. The default setting is Off.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ALARMS" + 'ENTER' +
"DEPTH ALARM" + 'ENTER'
5.5.5 GROUNDING ALARM
The chart plotter is provided with a function that, by querying the map's data,
verifies potential danger to navigation due to shallow water, land, rocks, obstructions and