Operation Manual

127
User Manual
6.5.11.3 Calibrate Water Speed
Allows calibrating the value of Water Speed sensor. The calibration value, in
the range between -10% to +10%, will be applied to the water speed from the
transducer.
6.5.11.4 Calibrate Water Temperature
Allows the calibration on the Water Temperature sensor. Using the readings
from a precise temperature measuring device, insert here a positive/negative offset to
display right value on Fish Finder screens.
6.5.11.5 Calibrate Auxiliary Temperature
Allows the calibration of the Aux Temperature sensor. Using the readings
from a precise temperature measuring device, insert here a positive/negative offset to
display right value on FF screens.
6.5.11.6 Set Default Settings
Restores the default values.
6.5.12 ALARMS
The Alarms menu allows you to define additional sonar alarm settings for
Fish Alarm, Shallow Alarm, Depth Alarm and Temperature Upper/Lower/Rate.
'MENU' + "ALARMS" + 'ENTER'
6.5.12.1 Shallow Alarm
Triggers an alarm when depth becomes shallower than the value set.
6.5.12.2 Deep Water Alarm
Triggers an alarm when depth becomes deeper than the value set.
6.5.12.3 Temp Upper
Triggers an alarm when the transducer reports a temperature (from TEMP 1
sensor) above the value set.
6.5.12.4 Temp Lower
Triggers an alarm when the transducer reports a temperature (from TEMP 1
sensor) below the value set.