Operation Manual

User Manual

3. Set the C-COM for Port 1 as follows:

'MENU' + "BASIC SETTINGS" + 'ENTER' + "INPUT/OUTPUT" + 'ENTER' +

"PORT 1 INPUT" + 'ENTER' + "C-COM" + 'ENTER'

2.6 ADDITIONAL C-CARDS

The chart plotter uses two types of C-MAP B

EPPESEN

cartridges: either a

chart cartridge or a data storage cartridge. A chart cartridge, called C-CARD, contains

detailed charts of the area covered. A data storage cartridge, called User C-CARD

can be used to permanently store your Routes, Waypoints, Marks, Events and Tracks

(see Par. 4.6).

Note

During normal operations the C-CARD should not be removed since the chart plotter may lock up.

2.6.1 INSERTING C-CARD

Open the door, hold the C-CARD by the long side and gently push the

C-CARD into the door slot (1). Close the door pushing the C-CARD in as far as it

will go to hold fixed into the chart plotter slot (2). When finished the door must be

right closed (3).

Fig. 2.6.1 - Inserting C-CARD

2.6.2 REMOVING C-CARD

To remove the C-CARD inserted in the chart plotter open the door (1). The

C-CARD will eject out of the chart plotter slot remaining fixed into the door (2). Then re-

move the C-CARD from the slot (3).

Fig. 2.6.2 - Removing C-CARD