Operation Manual

30
User Manual
Warning!
THIS IS THE RECOMMENDED WAY TO REMOVE THE C-CARD FROM THE
CHART PLOTTER. If opening the door the C-CARD remains fixed into the chart plotter slot,
do not try to remove it, but close the door again pressing it a lot so the C-CARD remains fixed
into the door. When you try to open the door again, the C-CARD will eject out of the slot.
Note
C-MAP BY JEPPESEN is continuously creating new charts and revising old ones. If you wish to
receive information on the newest available charts, you can write for the catalog of available C-
MAP BY JEPPESEN C-CARD at your dealer.
2.7 VIDEO INPUT
O NLY F OR PANORAMIC 8 HD/FISH & COMPACT 8 HD/FISH
By accessing this menu it is possible to see images on the chart plotter display
captured from an external video signal source, if connected to the chart plotter. Al-
lows the "picture-in-picture" functionality, so a Video Input image can be shown on a
image at full screen.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "INPUT/OUTPUT" + 'ENTER' +
"VIDEO INPUT" + 'ENTER'
2.7.1 SELECT VIDEO INPUT
Selects the preferred Video Input:
'MENU' + "BASIC SETTINGS" + 'ENTER' + "INPUT/OUTPUT" + 'ENTER' +
"VIDEO INPUT" + 'ENTER' + "SELECT VIDEO INPUT" + 'ENTER'
Available options are the following:
• None
• Full Video : Shows the image from the video camera at full screen.
• PiP (Picture In Picture) Video: Shows the image at full screen, with the image
from the video camera on a window which can be moved up/down and/or
right/left using the cursor key.
2.7.2 ACTIVATE VIDEO INPUT
Activates the Video Mode from the Video Input menu:
'MENU' + "BASIC SETTINGS" + 'ENTER' + "INPUT/OUTPUT" + 'ENTER' +
"VIDEO INPUT" + 'ENTER' + "ACTIVATE VIDEO INPUT" + 'ENTER'
At the activation of the Video Mode the following messages are shown on a
dedicated window: "Connnected Video Input Signal is XXXX. The Video Mode
will be activated". XXXX can be PAL or NTSC: the software automatically detects
the type of Video Input source connected. Once the Video Mode is active use the