Operation Manual
41
User Manual
'MENU' + "BASIC SETTINGS" + 'ENTER' + "INPUT/OUTPUT" + 'ENTER' +
"GPS SETUP" + 'ENTER'
Note
This item is shown alternately to the selection of the output messages when to the related port is
connected a GPS identificable by the chart plotter.
Internal GPS O
NLY
F
OR
COMPACT 8 XL/HD/HD F
ISH
Enables (On) or disables (Off) the Internal GPS. The default setting is On.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "INPUT/OUTPUT" + 'ENTER' +
"GPS SETUP" + 'ENTER' + "INTERNAL GPS" + 'ENTER'
Restart GPS
Restarts all GPS processes. Once executed, the message "Done" is shown.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "INPUT/OUTPUT" + 'ENTER' +
"GPS SETUP" + 'ENTER' + "RESTART GPS" + 'ENTER'
Differential Correction Source
Allows setting what kind of Differential Correction will be used by the GPS be-
tween WAAS-EGNOS and RTCM (beacon correction). The default setting is WAAS-
EGNOS.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "INPUT/OUTPUT" + 'ENTER' +
"GPS SETUP" + 'ENTER' + "DIFF CORRECTION SOURCE" + 'ENTER'
Navigation Speed
Allows setting the Navigation Speed among Low Speed, Medium Speed and High
Speed.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "INPUT/OUTPUT" + 'ENTER' +
"GPS SETUP" + 'ENTER' + "NAVIGATION SPEED" + 'ENTER'
3.2.8.5 Send & Receive Marks/Routes
Sets the desired port used for transferring User Points and Routes functions:
'MENU' + "BASIC SETTINGS" + 'ENTER' + "INPUT/OUTPUT" + 'ENTER' +
"SEND/REC ROUTES & MARKS" + 'ENTER' + "Port1/Port2/Port3/Port4*/Port5*"
+ 'ENTER'
Note*
Only for PANORAMIC 8 HD/8 HD Fish and COMPACT 8 HD/8 HD Fish.
3.2.8.6 C-Link
Selects the Master unit (Primary Station) or the Slave unit (Secondary Station):
'MENU' + "BASIC SETTINGS" + 'ENTER' + "INPUT/OUTPUT" + 'ENTER' +
"C-LINK" + 'ENTER' + "Secondary Station/Primary Station" + 'ENTER'
3.2.8.7 External Signal O
NLY
F
OR
PANORAMIC & COMPACT 8 HD/8 HD F
ISH
Sets the External Output. Then choose your preferred setting among Exter-