Operation Manual

User Manual

'MENU' + "BASIC SETTINGS" + 'ENTER' + "C- VOICE" + 'ENTER' + "OUTPUT

PORT" + 'ENTER'

3.3 A-B-C-D FUNCTION

The A-B-C-D Function allows you to create the A, B, C, D points and to

delete them.

3.3.1 INSERTING THE A-B-C-D POINTS

Place the cursor on the desired position and press 'ENTER': the A point and

an information window on A appear. Move the cursor and press 'ENTER' again: the

B point appears, connected to A with a straight segment; an information window on

A-B segment (distance (DST), bearing (BRG) and total distance from the first point)

appears. Moving the cursor and pressing 'ENTER' places the C and D points:

Fig. 3.3.1 - A-B-C-D points

3.3.2 DELETING THE A-B-C-D POINTS

Place the cursor on the desired point (A, B, C or D) and press 'CLEAR': the

point is deleted. When the point is deleted, the cursor is placed on the previous

point, if existed. The labels of the next points are renamed.

3.3.3 NAVIGATING ON THE A-B-C-D POINTS

If fix received is good, place the cursor on the desired point A, B, C or D and

press 'GO-TO'. When the ship arrives to the Destination point, navigation follows

to the next point (if existed).