Operation Manual

46
User Manual
• Perspective View ("Real World" perspective view of the chart, updated real-time
during navigation)
• Smooth-Zoom (smooth transition of cartographic levels)
• Enhanced Turbo-Zoom (extra fast cartography level change displaying the most
important cartographic objects)
• Enhanced Mixing Levels (seamless data presentation)
• Off-line redraw (cartography level transition without image construction)
Cartographic Data related Features
• Guardian Alarm (automatic control and alarm over obstacles on charts in front
of your boat)
• Safety Toolbar (interactive alarm system for situational awareness on screen)
• Safety Route Check (sophisticated function checking dangerous objects along
your navigation route)
MAX and NT/NT
+
C-CARD coexistence
• When NT
+
data and MAX data cover different areas, the chart plotter gets
data from both charts (depending on the current position).
• When NT
+
data and MAX data cover the same area, the chart plotter gets
data only from MAX chart.
3.5.1 MAP SETTINGS MENU
It is possible to select the Map Settings Menu in two modes:
'MAP' for 1 second
or
'MENU' + "MAP SETTINGS" +'ENTER"
in the following paragraphs only the second mode is indicated.
3.5.1.1 3D View (Perspective View)
'MENU' + "MAP SETTINGS" +'ENTER' + "3D View" + 'ENTER'+ "ON" +
'ENTER'
or:
'<MODE>' more times (if set by menu, see Par. 5.3)
Note
If selected using the '<MODE>' key, an information window describing the newly selected
mode is shown on the center of the screen for about 2 seconds, see also Par. 2.1.
Chart data may be projected in perspective mode (3D) during navigation.
This function allows setting the panoramic view of the chart.