Operation Manual

108
User Manual
5.11.2 MOBILARM STATUS
If you want to know information about the MOBILARM connected, follow
the procedure:
'MENU' + "About" + 'ENTER'
2008 JEPPESEN Italia S.r.l.
XXXX V. X.yy R [GG/MM/YYYY]
MOBILARM Connected
Fig. 5.11.2 - Example of About Page
In the About Page a new item appears, related to MOBILARM status, where
status can be:
• Function Not Activated : MOBILARM input format has not been set
from the Input/Output menu;
• Not Detected : the device has never been detected since the
chart plotter was turned On and input format
was set to MOBILARM;
• Connected : the communication with MOBILARM device
is Ok;
• Signal Lost : the device has been detected but now the signal
is no longer received;
• No Valid GPS Position : the communication with MOBILARM device
is Ok but the GPS position fix is not received.
5.11.3 MOBILARM PTX
PTX is the personal transponder device that is worn by the crew. If a PTX is
disconnected from the system a man over-board alarm is raised. So a MOB Waypoint
appears on the chart plotter display. In the following for brevity this MOB Waypoint
position is called PTX.
Warning!
Activating navigation to PTX pay attention and don't get too near the man-overboard (don't
knock the man down!).