Operation Manual

User Manual

5.11.4 MOVING CURSOR ON THE PTX ICON

Placing the cursor on the PTX icon shown on the screen, an information

window containing the PTX Identifier, position and status (Overboard or Recovered)

appears:

MOBILARM - PTX

OVERBOARD

41°16.552N

009°25.514E

Id Time

000001A0

11:25:15 PM

Fig. 5.11.4 - Example of PTX informaion window

5.11.4.1 Deleting PTX

The Delete PTX function permamently removes the selected PTX from the

chart plotter memory and from the chart display.

Move the cursor over the PTX to delete. Press 'ENTER', using the cursor

select "DELETE" and press 'ENTER'. A warning pop-up window will be shown.

Select "YES" and press 'ENTER'.

5.11.4.2 Goto PTX

The Goto PTX function activates the navigation to the selected PTX.

Place the cursor on PTX cursor. Press 'ENTER', using the cursor select

"GOTO" and press 'ENTER'.

If the navigation is set to the selected PTX, to terminate the navigation press

'ENTER', using the cursor select "STOP GOTO" and press 'ENTER'.

5.11.4.3 MOBILARM PTX List Page

The MOBILARM Alarm Status List shows the list of all PTX that returned

an alarm event. To obtain the page press 'ENTER', using the cursor select "LIST"

and press 'ENTER'.