Operation Manual

126
User Manual
6.5.10.2 Scrolling Speed
Adjusts the chart scrolling rate. Note that the scrolling rate is limited by the
sound speed and the depth according with the following relation: the deeper the
setting, the slower the scrolling rate. 100% is the maximum possible.
6.5.10.3 White Line
Controls how the chart plotter displays information about the bottom type
(hard or soft).
6.5.10.4 Fish Symbols
This selection allows determining the graphical representation of underwater
suspended targets.
• Echo: shows echoes
• Echo + Icon: shows the Fish icon and echoes
• Echo + Icon + Depth: shows the Fish icon, depth values and the fish echoes
• Echo + Depth: shows depth values
• Icon: shows Fish icons
• Icon + Depth: shows Fish icons and their depth (accordingly to currently
selected depth unit)
The Fish icons displayed are among four different shapes depending on the
size of the Target (Small, Med, Big, Huge).
6.5.10.5 Water Temperature
Allows you to choose the Water Temperature label displayed over the
echogram between Primary and External.
6.5.11 TRANSDUCER SETUP
The Transducer Setup menu contains settings that does not require frequent
changes.
'MENU' + "TRANSDUCER SETUP" + 'ENTER'
6.5.11.1 Keel Offset
It is the transducer depth offset from the surface. This makes it possible to
measure depth from the surface instead of from the trasducer's location.
6.5.11.2 Calibrate Sound Speed
Allows calibrating the value of Sound Speed in the water, depending on the
water temperature and salinity.