Operation Manual

138
User Manual
7.5.2 QUICK REFERENCE GUIDE
It is available an help on line to explain as the chart plotter works:
'MENU' + "HELP" + 'ENTER'
Using 'ZOOM IN' and 'ZOOM OUT' select previous and next page respectly.
7.5.3 IF YOU NEED ASSISTANCE
The list above should allow you to solve most of the operating problems you
are likely to encounter. Simply disconnecting the chart plotter from power for a
moment may solve your problem as well.
If this does not help, you can try one additional memory clear option. This
is a factory default RAM Clear that should only be tried after all other attempts have
been made. When using the RAM Clear feature, you will loose all user stored infor-
mation and the chartplotter will default to factory settings. Before this step, you
have the option of saving user Marks, Track history and Routes to a User C-CARD
(this is an optional purchase from your dealer). To perform a RAM Clear see Par.
6.6.1.
If you still need assistance, call your local dealer, reporting the Software Re-
lease and Cartography information available in the About Page.
'MENU' + "About..." + 'ENTER'
7.5.3.1 World Background Charts
The internal background charts can be updated to include the MAX A and
B level charts which provide improved marine data, rivers, lakes, terrestrial data
(major streets , highways , railways, etc...), Nav-Aids, depth areas, territorial water
areas, etc... by reading them from a special data C-CARDs (contact your local dealer).
All units must have the WorldWide Background upload function that is activated
from the system.
Worldwide Background Update
The System Update menu is entered from the About Page. To select this menu fol-
low the procedure:
Plug the special data C-CARD + 'MENU' + "About..." + 'ENTER' + 'MENU' +
"UPDATE WORLDWIDE CHARTS" + 'ENTER'
7.6 SYSTEM TEST
If you have connected your position-finding device according to the instruc-
tions, and chosen the proper menu selection for your device, and are still having