Operation Manual

141
User Manual
If the data displayed on the screen is unrecognizable, you may have selected the
wrong input parameters for your particular receiver. Check your receiver manual
to be sure that you have selected the proper interface format. If the screen is
blank, you may have a broken connection and no data is being received.
Use 'ZOOM IN' to stop (or continue after pause) data displaying, 'ENTER' to
show data in hex or ASCII mode (normal or small) and 'CLEAR' to exit.
7.6.5 MODEM TEST
To check the Modem connections. Press 'ENTER' to select the preferred
Port related to the connections made, to the Port that the Modem C-COM is con-
nected.