Operation Manual

23
User Manual
The
key
Press 'MAP' to cycle among the Chart pages. Press 'MAP' for 1 second to
open the Map Menu.
The
key
Press 'ECHO' to select the Fish Finder pages (*).
Note* ONLY FOR PANORAMIC 8 XL/HD & COMPACT 8 XL/HD
When Fish Finder or Radar is connected, otherwise the chart plotter emits three beeps. Refer to
the Fish Finder or Radar User Manual for more information.
2.2 TURNING THE CHART PLOTTER ON AND OFF
Before powering On the chart plotter, check for the correct voltage (10-35
volt dc, see Par. 6.3) and the correct connections with the positioning instrument
(see Par. 2.5).
2.2.1 TURNING ON
Press and hold 'POWER' for 1 second. The chart plotter emits one rapid
beep sound and a title page is opened.
After a few seconds, the first of the two Caution Notice pages is displayed,
reminding you that the chart plotter is only an aid to navigation, and should be used
with appropriate prudence. The electronic charts are not intended to substitute for
the official charts. Then the cartographic screen is displayed.
2.2.2 TURNING OFF
Press 'POWER' and hold for 3 seconds: a countdown timer appears on the
screen, if you release the key before the countdown timer reaches zero, the chart
plotter will remain On.
2.3 CHANGING BACKLIGHT AND CONTRAST
Press and immediately release 'POWER' (do not press and hold the key, or
the "power-off" message will be displayed!), a pop-up window appears to adjust the
backlight and the contrast of the display.