Operation Manual

User Manual

following keys to adjust video settings: press the left side of 'POWER' to adjust the

contrast and the right side of 'POWER' to adjust backlight, move the cursor up/

down to adjust brightness and left/right to adjust colors, press 'ZOOM IN'/ZOMM

OUT' to adjust hue phase. Pressing any other key exits from Video Mode.

2.7.2.1 Quick Activation

Pressing 'ENTER' for1 second enables the Video Input.

2.7.2.2 Activation from pages selection

Pressig 'PAGE', the Page Selection menu is shown: use the cursor key for

selecting the "Video" icon and pressing 'ENTER', image from the Video Input is

displyed.

2.7.3 RESTORE DEFAULTS

Restores default values of Contrast, Brightness, Backlight, color saturation

and Hue phase.

'MENU' + "BASIC SETTINGS" + 'ENTER' + "INPUT/OUTPUT" + 'ENTER' +

"VIDEO INPUT" + 'ENTER' + "RESTORE DEFAULTS" + 'ENTER'

After pressing 'ENTER' their relative settings will be set to the default val-

ues and the message “OK” will be shown.

2.8 MENU OPTIONS

You may select how the chart plotter displays primary information (such as

how time is displayed) from the Functions Menu.

'MENU'

Refer to Chapter 5 for more information on Main Menu.

2.9 DATA ENTRY

Information is keyed into the chart plotter when editing a Waypoint, enter-

ing a Route or using the Fix Correction functions. When the field is highlighted:

• Enter or edit data by pressing up/down cursor key to step through the available

characters until the preferred character is displayed.

• Press right cursor key to move the cursor to the right.

• Use left cursor key to move the cursor to the left.