Operation Manual

User Manual

4.2 MARK & EVENT

You may place a Mark, as it is called, at your cursor position, while Event is

created at your vessel position.

4.2.1 MARKS

You may tag a location on the chart with a Mark symbol and number, which

you can record for later use. Every time you place the cursor on a Mark the follow-

ing functions are available.

4.2.1.1 Adding Mark

Select Advanced Mode + 'ENTER' + "MARK" + 'ENTER'

The new Mark appears on your cursor position. An info window containing

Mark name, symbol and Latitude/Longitude is shown.

4.2.1.2 Deleting Mark

Select Advanced Mode + Place cursor on Mark

Press 'ENTER'. Select "DELETE" and press 'ENTER': the Mark remains

on the screen shaded until the next screen is redrawn.

Note

If you try to delete a Mark that belongs to many Routes, the chart plotter emits three beeps and

on the screen a Warning message appears. If you want to delete the Mark, press 'ENTER'.

4.2.1.3 Goto

Place cursor on Mark

Press 'GO-TO': a circle encloses the Mark symbol. A straight line is shown

on the screen connecting the Target with the ship's position. When the Target is

placed, all navigation data are referred to this Target.

4.2.1.4 Moving Mark

Select Advanced Mode + Place cursor on Mark

Press 'ENTER'. Select "MOVE" and press 'ENTER'. Move the cursor by

the cursor key, a dotted line connecting the Mark with the new position is shown: