Operation Manual

User Manual

4.3.3 EDITING EBL & VRM

Select Advanced Mode + Place cursor on the cross EBL & VRM + 'ENTER'

Select "EDIT" and press 'ENTER': with the cursor key move the line and

the circle, when the desired position is selected, press 'ENTER'. A window is shown

containing the bearing value for the EBL and the radius value for the VRM.

4.4 MORE ABOUT A-B-C-D FUNCTION

The A-B-C-D function, explained in the previous Par. 3.2, if Advanced Mode

is selected, allows you not only to create the A, B, C, D points and to delete them,

but also to modify and move them.

4.4.1 INSERTING THE A-B-C-D POINTS

Place the cursor on the desired position and press 'ENTER' (on the screen

the Create window appears), by using the cursor key select "A-B-C-D" and press

'ENTER'; otherwise press 'A-B-C-D' (if it is present). The A point and an informa-

tion window on A appear. Move the cursor, and press 'ENTER', select "A-B-C-D"

and press 'ENTER' again; otherwise press 'A-B-C-D' (if it is present), the B point

appears, connected to A with a straight segment; an information window on A-B

segment (distance (DST), bearing (BRG) and total distance from the first point) ap-

pears. Moving the cursor, following the above procedure the C and D points are

placed (see previous Fig. 3.3.1).

4.4.2 DELETING THE A-B-C-D POINTS

When placing the cursor on the desired point (A, B, C or D) the information

window appears. Press 'ENTER', select "DELETE" and press 'ENTER' again: the

point is deleted. When the point is deleted, the cursor is placed on the previous

point, if existed. The labels of the next points are renamed.

4.4.3 DELETING THE A-B-C-D SEGMENT

When placing the cursor on the desired point (A, B, C or D) or on segment

between two points the information window appears. Press 'ENTER', select "DELETE

ALL" and press 'ENTER' again: all points and connecting segments are deleted.